Refereed Journal Papers

In Press/Under Review/To be Submitted

1. Pirmoz, A., Abot, J. L. and Avilés, F. Simulation of mechanical response of carbon nanotube yarns under uniaxial tensile loading. (to be submitted).

2. Rodríguez-Uicab, O., Woo, B., Nardo, L., Seabra, A. and Abot, J. L. Foil strain gauge sensors comprised of carbon nanotube yarns: Mechanical response. (to be submitted).

3. Rodríguez-Uicab, O., Abot, J. L.  and Avilés, F. Effect of curing temperature of epoxy resin on the electrical response of carbon nanotube yarn monofilament composites. (to be submitted).

4. Rodríguez-Uicab, O., Tayyarian, T. and Abot, J. L. Mechanical characterization of monofilament carbon nanotube yarn embedded on rubber matrix using tension and compression cyclic load. (to be submitted).

5. Rodríguez-Uicab, O., Guay, I., Tayyarian, T., Abot, J. L.  and Avilés, F. Effect of polymer viscosity and polymerization kinetics on the electrical response of carbon nanotube yarn/vinyl ester composites. (to be submitted).

6. Tayyarian, T., Rodríguez-Uicab, O. and Abot, J. L. Monitoring of curing and cyclic thermoresistivity using monofilament carbon nanotube yarn/rubber matrix composites. (to be submitted).

Published

7. Rodríguez-Uicab, O., Abot, J. L and Avilés, F. Electrical resistance sensing of epoxy curing using an embedded carbon nanotube yarn. Sensors 20, 3230 (2020).

8. Balam, A., Cen-Puc, M., Rodríguez-Uicab, O., Abot, J. L. and Avilés, F. Cyclic thermoresistivity of freestanding carbon nanotube yarns and yarns embedded into a polymer. Adv. Eng. Mater. 2000220 (2020).

9. Balam, A., Cen-Puc, M., May-Pat, A., Abot, J. L. and Avilés, F. Influence of polymer matrix on sensing capabilities of carbon nanotube polymeric thermistors. Smart Mater. Struct. 29: 015012 (2020).

10. Can-Ortiz, A., Abot, J. L. and Avilés, F. Electrical characterization of carbon-based fibers and their viscoelastic-induced piezoresistivity. Carbon 145: 119-130 (2019).

11. Anike, J. C., Belay, K. and Abot, J. L. Effect of twist on the electromechanical properties of carbon nanotube yarns. Carbon 142: 491-503 (2019).

12. Christoff, B. G., Santana, H. B., Cardoso, E. L., Abot, J. L. and Tita, V. The influence of matrix impregnation on effective elastic properties of a unidirectional carbon nanotube bundled composite: A topology optimization approach. Materials Today: Proceedings 8, 789–803 (2019). 

13. Abot, J. L., Góngora-Rubio, M. R., Anike, J. C., Kiyono, C. Y., Mello, L. A. M., Cardoso, V. F., Rosa, R. L. S., Kuebler, D. A., Brodeur, G. E., Alotaibi, A. H., Coene, M. P., Coene, L. M., Jean, E., Santiago, R. C., Oliveira, F. H. A., Rangel, R. C., Thomas, G. P., Belay, K., da Silva, L. W., Moura, R. T., Seabra, A. C. and Silva, E. C. N. Foil strain gauges sensing using piezoresistive carbon nanotube yarn: Fabrication and calibration. Sensors Special Issue: Integrated Structural Health Monitoring in Polymeric Composites 18, 464 (2018). 

14. Anike, J. C., Belay, K. and Abot, J. L. Piezoresistive response of carbon nanotube yarns under tension: Parametric effects and phenomenology. New Carbon Mater. 33 (2):140-154 (2018).

15. Anike, J. C., Le, H. H., Brodeur, G. E., Kadavan, M. M. and Abot, J. L. Piezoresistive response of integrated carbon nanotube yarns under compression and tension: the effect of lateral constraint. J. Carbon Res. 3, 14 (2017).  

16. Anike, J. C., Bajar, A. and Abot, J. L. Time-dependent effects on the coupled mechanical-electrical response of carbon nanotube yarns under tensile loading. J. Carbon Res. 2(1), 3 (2016).   

17. Abot, J. L., Kiyono, C. Y., Thomas, G. P. and Silva, E. C. N. Strain gauge sensors comprised of carbon nanotube yarn: Parametric numerical analysis of their piezoresistive response. Smart Mater. Struct. 24 (7): 075018 (2015).    

18. Abot, J. L., Wynter, K., Mortin, S. P., Borges de Quadros, H., Le, H. H., Renner, D. C. and Belay, K. Localized detection of damage in laminated composite materials using carbon nanotube yarn sensors. J. Multifunc. Compos. Special Issue: Novel Sensing Techniques and Approaches in Composite Materials 2: 217-226 (2014).

19. Abot, J. L., Alosh, T. and Belay, K. Strain dependence of electrical resistance in carbon nanotube yarns. Carbon 70: 95-102 (2014).

20. Daniel, I. M., Abot, J. L., Schubel, P. M. and Luo, J. -J. Response and damage tolerance of composite sandwich structures under low velocity impact. Exper. Mech. 52 (1): 37-47 (2012).

21. Abot, J. L., Gabbai, R. D. and Harsley, K. Effect of woven fabric architecture on interlaminar mechanical response of composite materials: an experimental study. J. Reinf. Plast. Comp. 30 (24): 2003-2014 (2011).

22. Drensky, G., Hamed, A., Tabakoff, W. and Abot, J. L. Experimental investigation of polymer matrix reinforced composite erosion characteristics. Wear 270 (3-4): 146-152 (2011).

23. Abot, J. L., Raghavan, V., Li, G. and Thomas, E. L. Effect of interface, height and density of tall carbon nanotube arrays on their thermal conductivity: an experimental study. J. Nanosci. Nanotechno. 11 (1): 1-10 (2011).

24. Abot, J. L., Bardin, G., Raghavan, V., Govindaraju, N., Spriegel, C. and Song, Y. Thermal conductivity of carbon nanotube array laminated composite materials. J. Compos. Mater. 45 (3): 321-340 (2011). 

25. Abot, J. L., Schulz, M. J., Song, Y., Medikonda, S. and Rooy, N. Novel distributed strain sensing in polymeric materials. Smart Mater. Struct. 19 (8): 085007 (2010).

26. Song, Y. and Abot, J. L. On the mechanical response of carbon nanotube array laminated composite materials. J. Reinf. Plast. Comp. 29 (22): 3401-3410 (2010).

27. Jayasinghe, C., Li, W., Abot, J. L., Song, Y., Shanov, V. N., Fialkova, S., Yarmolenko, S., Sundaramurthy, S., Chen, Y., Cho, W., Chakrabarti, S., Li, G., Yun, Y. and Schulz, M. J. Nanotube responsive materials. MRS Bull. 35 (9): 682-692 (2010).

28. Abot, J. L., Song, Y., Sri Vatsavaya, M., Medikonda, S., Kier, Z., Jayasinghe, C., Rooy, N., Shanov, V. N. and Schulz, M. J. Delamination detection with carbon nanotube thread in self-sensing composite materials. Compos. Sci. Technol.  70 (7): 1113-1119 (2010). 

29. Evora, M. C., Klosterman, D., Lafdi, K., Li, L. and Abot, J. L. Functionalization of carbon nanofibers through electron beam irradiation. Carbon 48 (7): 2037-2046 (2010). 

30. Kulkarni, M., Carnahan, D., Kulkarni, K., Qian, D. and Abot, J. L. Elastic response of a carbon nanotube reinforced fiber polymeric composite: a numerical and experimental study. Compos. Part B-Eng. 41 (5): 414-421 (2010). 

31. Mallik, N., Schulz, M. J., Shanov, V. N., Hurd, D., Chakraborty, S., Jayasinghe, C., Abot, J. L. and Song, A. Study on carbon nano-tube spun thread as piezoresistive sensor element. Adv. Mater. Res. 67 (13): 155-160 (2009). 

32. Guo, Y., Shi, D., Cho, H., Lian, J., Song, Y., Abot, J., Poudel, B., Ren, Z., Wang, L. and Ewing, R. C. Enhanced thermal stability of carbon nanotubes by plasma surface modification in Al2O3 composites. J. Appl. Phys 104: 074302-1-6 (2008), V. J. Nano. Sci. Techn. 18:15 (2008). 

33. Abot, J. L., Song, Y., Schulz, M. J. and Shanov, V. N. Novel carbon nanotube array-reinforced laminated composite materials with higher interlaminar elastic properties. Compos. Sci. Technol. 68 (13): 2755-2760 (2008). 

34. Balawi, S. and Abot, J. L. A refined model for the effective in-plane elastic moduli of hexagonal honeycombs. Compos. Struct. 84 (2): 147-158 (2008). 

35. Balawi, S. and Abot, J. L. The effect of honeycomb relative density on its effective in-plane elastic moduli: an experimental study. Compos. Struct. 84 (4): 293-299 (2008). 

36. Schulz, M. J., Maheshwari, G., Abot, J., Song, Y., Jayasinghe, C., Mallik, N., Shanov, V., Dadhania, M., Yun, Y. -H., Yarmolenko, S. and Sankar, J. Responsive nanomaterials for engineering asset evaluation and condition monitoring. Insight - Non-Destructive Testing and Condition Monitoring, British Institute of Nondestructive Testing, 50 (8): 436-449 (2008). 

37. Guo, Y., Shi, D., Cho, H., Lian, J., Song, Y., Abot, J., Poudel, B., Ren, Z., Wang, L. and Ewing, R. C. Effects of plasma surface modification on interfacial behaviors and mechanical properties of CNT-Al2O3 nanocomposites. Appl. Phys. Lett. 91: 216903 (2007). 

38. Yasmin, A., Luo, J. J., Abot, J. L. and Daniel, I. M. Mechanical and thermal behavior of clay/epoxy nanocomposites. Compos. Sci. Technol. 66 (14): 2415-2422 (2006). 

39. Abot, J. L., Yasmin, A. and Daniel, I. M. Hygroscopic behavior of woven fabric carbon/epoxy composites. J. Reinf. Plast. Comp. 24 (2): 195-207 (2005).

40. Abot, J. L. and Daniel, I. M. Through-thickness mechanical characterization of woven fabric composites. J. Compos. Mater. 38 (7): 543-553 (2004). 

41. Abot, J. L., Yasmin, A., Jacobsen, A. J. and Daniel, I. M. In-plane mechanical, viscoelastic and thermal properties of a satin fabric carbon/epoxy composite. Compos. Sci. Technol. 64 (2): 263-268 (2004). 

42. Yasmin, A., Abot, J. L. and Daniel, I. M. Processing and characterization of clay/epoxy nanocomposites by shear mixing. Scripta Mater. 49 (1): 81-86 (2003). 

43. Daniel, I. M., Gdoutos, E. E., Abot, J. L. and Wang, K. A. Deformation and failure of composite sandwich beams. J. Thermoplast. Compos. Mater. 16 (4): 345-364 (2003). 

44. Abot, J. L., Daniel, I. M. and Gdoutos, E. E. Contact law for composite-foam sandwich beams. J. Sandw. Struct. Mater. 4 (2): 157-173 (2002). 

45. Daniel, I. M., Gdoutos, E. E., Wang, K. -A. and Abot, J. L.  Failure modes of composite sandwich beams. Int. J. Damage Mech. 11 (4): 309-334 (2002). 

46. Gdoutos, E. E., Daniel, I. M., Wang, K. -A. and Abot, J. L. Nonlinear behavior of composite sandwich beams in three-point bending. Exper. Mech. 41 (2): 182-188 (2001). 

47. Setua, D. K., Ghoniem, N. M., Abot, J. L., et al. Short silk fibre-rubber composites. Med. Eng. Phys. 23 (7): 503-509 (2001). 

48. Daniel, I. M. and Abot, J. L. Fabrication, testing and analysis of composite sandwich beams. Compos. Sci. Technol. 60 (12-13): 2455-2463 (2000). 

Book Chapters

49. Anike, J. C. and Abot, J. L. Chapter 4.4: Carbon Nanotubes and Carbon Nanotube Fibers, 21st Century Nanoscience – A Handbook, vol. 4, edited by K. Sattler, Taylor & Francis, ISBN 9780429351617 (2020).

50. Anike, J. C. and Abot, J. L. Chapter 11: Sensors Based on CNT Yarns, Carbon Nanotube Fibres and Yarns - Production, Properties and Applications In Smart Textiles, edited by M. Miao, Elsevier, ISBN 978081027226 (2019).

51. Abot, J. L. Chapter 10: Structural Health Monitoring Using Integrated Carbon Nanotube Fibers, Nanotube Superfiber Materials, Science to Commercialization, vol. 2, edited by M. J. Schulz, Elsevier, ISBN 9780128126677 (2019).

52. Abot, J. L. and Punnakattu Rajan, C. Chapter 14: Carbon Nanotube Fibers, Carbon Nanomaterials Sourcebook, vol. 1, edited by K. Sattler, Taylor & Francis, ISBN 9781482252729 (2016).

53. Kang, I., Maheshwari, G., Yun, Y. -H., Shanov, V., Chopra, S., Abot, J., Choi, G., Schulz, M. J. Nanoengineering of Sensory Materials, Encyclopedia of Structural Health Monitoring, edited by C. Boller, F. -K. Chang, and Y. Fujino, Wiley, ISBN 9780470061626 (2009).

54. Mallik, N., Abot, J., Song, Y., Maheshwari, G., Chu, W., Head, E., Dadhania, M., Li, W., Shanov, V., Jayasinghe, C., Salunke, P., Lee, L., Hurd, D., Yun, Y. H., Yarmolenko, S., Sankar, J., Phillips, P., Komoroski, R. A., Chu, W. J., Bhattacharya, A., Watts, N. and Schulz, M. J. Chapter 16: Carbon Nanotube Array Based Smart Materials, Carbon Nanotubes: Multifunctional Materials, edited by M. Umeno and P. R. Somani, Applied Science Innovations Pvt. Ltd., India, ISBN 9788190602709 (2009).

Book Articles

55. Abot, J. L. and Song, Y. Novel nanoreinforced laminated composite material: concept and recent progress. ASC Series on Advances in composite materials: Nanocomposites, ISBN: 9781605950730 (2012).

56. Gdoutos, E. E. and Abot, J. L. Indentation of a PVC cellular foam. Recent Advances in Experimental Mechanics: In Honor of Isaac M. Daniel, edited by E. E. Gdoutos, Kluwer, 55-64, ISBN 1402006837 (2004).

57. Daniel, I. M., Gdoutos, E. E., Abot, J. L. and Wang, K. -A. Core failure of sandwich beams. Recent Advances in Composite Materials: In Honor of S. A. Paipetis, edited by E. E. Gdoutos and Z. P. Marioli-Riga, Kluwer, 279-290, ISBN 978904816294-9 (2003).

Refereed Proceeding Papers

Published/In Press

58. Avilés, F., Pérez-Aranda, C., Pech-Pisté, R., Carrillo, H., Uribe, G., Balam, A., Arana-Riera, G., Rodríguez-Uicab, O., Guay, I., Abot, J. L. and Rivero-Ayala, M. A. Multifunctional properties of carbon nanotube yarns and their sensing applications. Proceedings of 23rd International Conference on Composite Materials, Belfast, Northern Ireland (2021).

59. Abot, J. L., O. Rodriguez-Uicab, O., Tayyarian, T., Binfaris, A., Pirmoz, A., Alsubhani, A., Asi, A., Garcia Guerra, I. and Woo, B.. Integrated sensing applications using carbon nanotube yarns. Proceedings of 23rd International Conference on Composite Materials, Belfast, Northern Ireland (2021).

60. Rodriguez-Uicab, O., Nardo, L., Abot, J. L. and Avilés, F. Thermoresistive characterization of monofilament composites based on carbon nanotube yarns. Proceedings of 35th American Society for Composites Conference, Seattle, WA (2018).

61. Abot, J. L., Rodriguez-Uicab, O., Anike, J. C., Balam, A., Cen-Puc, M. and Avilés, F. Coupled piezoresistive and thermoresistive behavior of carbon nanotube yarns and their thermosetting monofilament composites. Proceedings of 22nd International Conference on Composite Materials, Melbourne, Australia (2019).

62. Viotto Sarro, G., Pereira, D. A., Rodrigues, L. M., Rade, D. A. and Abot, J. L. Application of carbon nanotube fiber sensors for strain monitoring in aluminum plates. Proceedings of 25th ABCM International Congress of Mechanical Engineering, Uberlândia, MG, Brazil (2019).

63. Abot, J. L., Anike, J. C., Pirmoz, P., Tayyarian, T., Saha, T., Binfaris, A., Rodriguez-Uicab, O. and Avilés, F. Polymer-embedded carbon nanotube yarns: Unveiling their piezoresistive response and sensitivity through parametric studies. Proceedings of Carbon, Lexington, KY (2019).

64. Pirmoz, A. and Abot, J. L. Meso-scale mechanical response modeling of carbon nanotube yarns. 1st National Conference on Infrastructure Engineering, Urmia, Iran (2018).

65. Anike, J. C., Saha, B. and Abot, J. L. Development of robust electrically insulated carbon nanotube yarns for sensing in conductive composites. Proceedings of 33th American Society for Composites Conference, Seattle, WA (2018).

66. Pirmoz, A., Anike and Abot, J. L. Meso-scale computational simulation of CNT yarns. Proceedings of 33th American Society for Composites Conference, Seattle, WA (2018).

67. Christoff, B. G., Santana, H. B., Cardoso, E. L., Abot, J. L. and Tita, V. The influence of matrix impregnation on effective elastic properties of a unidirectional carbon nanotube bundled composite: A topology optimization approach. Proceedings of 4th Brazilian Conference on Composite Materials, Rio de Janeiro, RJ, Brazil (2018).

68. Anike J. C. and Abot, J. L. Carbon nanotube fiber-based torsion sensors: effect of twist on their piezoresisitivity. Proceedings of the Materials Research Society Symposium, Phoenix, AR (2018).

69. Balam, A., Cen-Puc, M., Gamboa, F., Abot, J. L. and Avilés, F. Thermoresistivity of polymeric composites modified with carbon nanotubes and carbon nanotube yarns. Proceedings of ASME International Mechanical Engineering Congress & Exposition, Tampa, FL (2017).

70. Abot, J. L., Anike J. C., Bills J. H., Onorato, Z., Gonteski, D. L., Kvelashvili, T. and Belay, K. Carbon nanotube yarn sensors for precise monitoring of damage evolution in laminated composite materials: Latest experimental results and in-situ and post-testing validation. Proceedings of 32nd American Society for Composites Conference, West Lafayette, IN (2017).

71. Anike, J. C., Bills, J. H., Brodeur, G. E., Kadavan, M. M., Belay, K. and Abot, J. L. Comparative study of the piezoresistivity of free and constrained carbon nanotube yarns in a medium: Effect of slippage. Proceedings of 32nd American Society for Composites Conference, West Lafayette, IN (2017).

72. Abot, J. L., Anike J. C., Jean, E., Brodeur, G. E., Albin, K., Kadavan, M. M., Pires, F. A., Alotaibi, A. H., Belay, K., Cardoso, V. F., Rosa, R. L. S. and Seabra, A. C. Foil strain gauge sensors of piezoresistive carbon nanotube yarn: fabrication and calibration. Proceedings of 32nd American Society for Composites Conference, West Lafayette, IN (2017).

73. Abot, J. L. C. Structural health monitoring using carbon nanotube yarns: sensing concept and applications in composites. Proceedings of 5th International Symposium on Sensor Science, Barcelona, Spain (2017).

74. Anike J. C., Abot, J. L., Bills, J. H., Gonteski, D., Kvelashvili, T., Alsubhani, M. S., Albin, K., S. P. Mortin, V. R., Gonzaga, V. C., Oliveira, G. N., Silva, P. H. R. M., Navarro, R. B. A., Barbosa, V. R., Belay, K., Behrmann, G. P. and Akay, E. Integrated structural health monitoring of laminated composites using carbon nanotube yarns under static loading: experimental results and validation. Proceedings of 21st International Conference on Composite Materials, Xian, China (2017).

75. Can-Ortiz, A., Avilés, F. and Abot, J. L. Relaxation-induced piezoresistivity in carbon-based monofilament hierarchical polymer composites. Proceedings of 21st International Conference on Composite Materials, Xian, China (2017). 

76. Abot, J. L. and Anike, J. C. From carbon nanotube yarns to fibers into sensors: Recent findings and challenges. 8th International Conference on Nanotechnology, University of Cambridge, Cambridge, United Kingdom (2017).

77. Abot, J. L. Carbon nanotube fibers: Unveiling their piezoresistive response towards integrated sensing in engineering applications. Nanotechnology Materials and Devices, Dayton, OH (2016).

78. Can-Ortiz, A., Ku-Herrera, J. J., Rodríguez-Uicab, O., May-Pat, A., Gamboa, F., Abot, J. L. and Avilés, F. Self-sensing of viscoelastic phenomena in multiscale composites by using the electrical resistance approach. Proceedings of 31st American Society for Composites Conference, Williamsburg, VA (2016).

79. Le, H. H., Carvalho, G. L., Bonardi, M. K., Coelho, R. C., Brodeur, G., Cen-Puc, M., Ku-Herrera, J. J., Avilés, F. and Abot, J. L. Piezoresistive and thermoresistive response of constrained carbon nanotube yarns towards their use as integrated sensors. Proceedings of 31st American Society for Composites Conference, Williamsburg, VA (2016).

80. Anike, J. C., AlHamdan, K., Belay, K. and Abot, J. L. Piezoresistive response of carbon nanotube yarns: Experimental characterization and phenomenology. Proceedings of 31st American Society for Composites Conference, Williamsburg, VA (2016).

81. Abot, J. L., Anike, J. C., Mortin, S. P., Bills, J., Gonzaga, V., Oliveira, G., Silva, P., Araujo, R., Barbosa, V., Akay, E. and Belay, K. Precise monitoring of damage evolution in laminated composite materials using integrated carbon nanotube fiber sensors: experimental results and validation. Proceedings of 31st American Society for Composites Conference, Williamsburg, VA (2016).

82. Esteves, F. M., Nehmetallah, G. and Abot, J. L. Low-cost attitude determination system using an extended Kalman filter algorithm. Proceedings of SPIE: Signal Processing, Sensor/Information Fusion, and Target Recognition XXV, Baltimore MD (2016), http://proceedings.spiedigitallibrary.org/proceeding.aspx?articleid=252450.

83. Bajar, A., Anike, J. and Abot, J. L. Hysteresis and time-dependent effects on the coupled mechanical-electrical response of unconstrained carbon nanotube fiber subjected to uniaxial tensile loading. Proceedings of 30th American Society for Composites Conference, Lansing, MI (2015). 

84. Abot, J. L., Wynter, K., Mortin, S. P., Le, H. H., Borges de Quadros, H. and Casarotto, V. A., Burns, J., Leo, A., Belk, A. and Belay, K. Localized damage detection and strain measurement in laminated composite materials using integrated carbon nanotube yarn sensors. Proceedings of 20th International Conference on Composite Materials, Copenhagen, Denmark (2015). 

85. Abot, J. L., Silva, E. C. N., Kiyono, C. Y. and Thomas, G. P. Strain gauge sensors comprised of carbon nanotube yarn: concept and modeling. Blucher Materials Science Proceedings 1(1):101. Proceedings of 13th International Symposium on Multiscale, Multifunctional and Functionally Graded Materials, Atibaia, São Paulo, Brazil (2014).

86. Abot, J. L., Alosh, T., Bajar, A., Renner, D., Good, E., Sensale-Rodriguez, B., Arezoomandan, S. and Belay, K.  Coupled mechanical and electrical response of carbon nanotube yarn sensors for self-sensing composite materials. Proceedings of 29th American Society for Composites Conference, San Diego, CA (2014).

87. Borges de Quadros, H., Wynter, K. and Abot, J. L. Damage initiation detection in laminated composite materials using carbon nanotube yarn sensors. XIII Materials Research Society Conference, João Pessoa, Paraíba, Brazil (2014).

88. Abot, J. L., Wynter, K., Belay, K, Lamos, M. -D., Seidel, G. and Vondrasek, B. Mode II delamination detection in laminated composite materials using carbon nanotube yarn: state-of-the-art and challenges. Proceedings of 28th American Society for Composites Conference, State College, PA (2013).

89. Abot, J., Wynter, K., Alosh, T. and Belay, K. Strain and damage monitoring using carbon nanotube thread sensors. Proceedings of 19th International Conference of Composite Materials, Montreal, Canada (2013).

90. Abot, J. L., Belay, K., Wynter, K., Alosh, T., Nesbeth, B. and Smith, L. Damage detection in self-sensing laminated composites and nanocomposites. Proceedings of 27th American Society for Composites Conference, Arlington, TX (2012).

91. Abot, J. L., Song, Y., Schulz, M. J., Shanov, V. N., Belay, K., Abere, Y., Place, B. and Weatherford, C. On the development of integrated strain sensors for polymers and composite materials. Proceedings of 26th American Society for Composites Conference, Montreal, Quebec, Canada (2011).

92. Abot, J. L. and Song, Y. On the delamination detection of laminated composite materials using integrated carbon nanotube sensors. Proceedings of ASME Applied Mechanics and Materials Conference, Chicago, IL (2011).

93. Song, Y., Li, G., Kluener, J., Conroy, G.,  Simmons, K., Jones, J. T., Koenig, R., Shanov, V. N., Li, W. F.,  Cho, W. D., Jayasinghe, C., Abot, J. L., Dandino, C. and Schulz, M. J. Carbon nanotube materials for smart composites. Proceedings of the American Chemical Society Meeting 242 (177) (2011).

94. Abot, J. L. and Song, Y. On the development of an integrated strain sensor for composite materials. Proceedings of ASME Applied Mechanics and Materials Conference, Chicago, IL (2011).

95. Abot, J. L., Song, Y., Medikonda, S., Schulz, M. J. and Rooy, N. A distributed piezoresistive strain gauge for polymeric materials. Proceedings of 25th American Society for Composites Conference, Dayton, OH (2010).

96. Abot, J. L., Song, Y., Schulz, M. J., Medikonda, S., Sri Vatsavaya, M., Kier, Z., Jayasinghe, C.,   Shanov, V. N. and Rooy, N. Self-sensing composite materials: delamination detection. Proceedings of 25th American Society for Composites Conference, Dayton, OH (2010).

97. Mast, D., Ma, T., Jayashinghe, C., Abot, J., Schulz, M. and Shanov, V. Electrical and thermal transport properties of carbon nanotube threads at high temperatures. APS Meeting Abstracts 1, 12004 (2010).

98. Abot, J. L., Schulz, M. J., Shanov, V. N., Song, Y. and Sri Vatsavaya, S. Mode II delamination detection in composite materials with carbon nanotube sensor threads. Proceedings of 16th US National Congress on Theoretical and Applied Mechanics, University Park, PA (2010). 

99. Abot, J. L., Raghavan, V., Bardin, G., Govindaraju, N. and Song, Y. On the thermal conductivity anisotropy of a carbon nanotube array laminated composite material. Proceedings of 16th US National Congress on Theoretical and Applied Mechanics, University Park, PA (2010). 

100. Harsley, K., Song, Y. and Abot, J. L. Effect of woven fiber architecture on the interlaminar mechanical response of composite materials: an experimental study. Proceedings of 24th American Society for Composites Conference, Newark, DE (2009). 

101. Song, Y. and Abot, J. L.  Carbon nanotube array-reinforced laminated composite materials: interphase and mechanics of deformation. Proceedings of 24th American Society for Composites Conference, Newark, DE (2009).

102. Mast, D. B., Jayasinghe, C., Chakobarty, S., Li, L., Chen, Y., Cho, W., Schulz, M. J., Shanov, V., Abot, J. and Pixley, S. Carbon nanotube threads, yarns and ribbons: Making the transition from materials to high performance devices for defense applications. 2009 Nano Technology for Defense Conference, Burlingame, CA (2009).

103. Song, Y. and Abot, J. L. Thermomechanical response and interphase of a novel carbon nanotube array-reinforced laminated composite material. Proceedings of 23th American Society for Composites Conference, Memphis, TN (2008). 

104. Maheshwari, G., Mallik, N., Abot, J., Sundaramurthy, S. N., Wondong, Head, E., Dadhania, M., Li, W., Shanov, V., Jayasinghe, C., Salunke, P., Lee, L., Hurd, D., Yun, Y. -H., Yarmolenko, S., Sankar, J. and Schulz, M. J. Smart nanocomposites for industrial health monitoring. Proceedings of 40th International SAMPE Fall Technical Conference, Memphis, TN (2008).

105. Maheshwari, G., Mallik, N., Abot, J., Song, A., Head, E., Dadhania, M., Shanov, V., Jayasinghe, C., Salunke, P., Lee, L., Hurd, D., Yun, Y. -H., Yarmolenko, S., Sankar, J., Philips, P., Komoroski, R. A., Bhattachaya, A., Watts, N. and Schulz, M. J. Nanoscale materials for engineering and medicine. 

Proceedings of SPIE 6931 693106-1-15 (2008).

106. Maheshwari, G., Mallik, N., Abot, J., Song, A., Head, E., Shanov, V., Schulz, M. J., Jayasinghe, C., Salunke, Yun, Y. -H. and Yarmolenko, S. Powering up nanoparticles: versatile carbon materials for use in engineering and medicine. Nanotechnology, SPIE, http://spie.org/x2400.xml (2008).

107. Mallik, N., Jayasinghe, C., Chakraborty, S., Salunke, P., Li, W., Cho, W., Lee, L., Head, E., Hurd, D., Abot, J., Song, Y., Shanov, V. and Schulz, M. J. Fabrication of threads from carbon nanotube arrays. Proceedings of Processing and Fabrication of Advanced Materials, New Delhi, India, -XVII, Vol. II, 15-17, pp. 538-551 (2008).

108. Shi, D., Guo, Y., Cho, H., Lian, J., Song, Y., Abot, J., Poudel, B., Ren, Z., Wang, L. and Ewing, R. C. Deposition of ultrathin polymer films on CNTs for enhanced dispersion and interfacial bonding by plasma polymerization in CNT-alumina composites. Proceedings of the 137th TMS Annual Meeting and Exhibition, New Orleans, LA (2008).

109. Balawi, S. and Abot, J. L. Refined model for effective in-plane elastic moduli and Poisson’s ratios of general hexagonal honeycombs. Proceedings of 39th International SAMPE Fall Technical Conference, Cincinnati, OH (2007).

110. Abot, J. L., Song, Y., Schulz, M. and Shanov, V. Novel carbon nanotube array reinforced laminated composite material. Proceedings of 39th International SAMPE Fall Technical Conference, Cincinnati, OH (2007).

111. Iroh, J., Abot, J., Boddu, H., Tan, L.-S., Wang, H., Hourz, M. and Price, G. Dynamic mechanical properties of carbon nanofiber/polyimide and carbon nanotube/polyimide nanocomposites. Proceedings of 39th International SAMPE Fall Technical Conference, Cincinnati, OH (2007). 

112. Cho, H., Guo, Y., Shi, D., Lian, J., Song, Y., Abot, J., Poudel, B., Ren, Z., Wang, L. and Ewing, R. C. Processing of carbon nanotube/Al2O3 composites by nanoparticle surface plasma polymerization. Proceedings of 39th International SAMPE Fall Technical Conference, Cincinnati, OH (2007).  

113. Abot, J. L. and Wang, F. Effect of nanophase particle concentration on the deformation during glass transition of a polymer nanocomposite. American Chemical Society, Biological and Synthetic Macromolecules for Emerging Nanotechnologies-II, A Symposium in the Division of Polymer Chemistry, 234th American Chemical Society National Meeting, Boston, MA, Polymer Preprints 48:2 90-91 (2007).

114. Abot, J. L. and Song, Y. Novel nanoreinforced laminated composite material: concept and recent progress. Proceedings of 22th American Society for Composites Conference, Seattle, WA (2007).

115. Shanov, V. N., Choi, G., Maheshwari, G., Seth, G., Chopra, S., Li, G., Yun, Y.-H., Abot, J. L. and Schulz, M. J. Structural nanoskin based on carbon nanosphere chains.  Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2007, Proceedings of SPIE 6529 652927-1-15 (2007).

116. Balawi, S. and Abot, J. L. The effect of honeycomb relative density on its effective elastic properties: a theoretical and experimental study. Proceedings of International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Applied Mechanics Division, Nano-, Bio- and Cellular Materials, Chicago, IL (2006).  

117. Guo, Y., Cho, H., Song, Y., Abot, J. and Shi, D. A novel process of CNTs-Al nanocomposite ceramics. Proceedings of Materials Science & Technology 2006, Nanocomposites -Their Science, Technology and Applications, Cincinnati, OH (2006).

118. Daniel, I. M., Abot, J. L., Luo, J. J. and Schubel, P. M. Three-dimensional characterization of constitutive behavior and failure of textile composites. Proceedings of 11th International Conference of Fracture, Torino, Italy (2005).

119. Daniel, I. M., Gdoutos, E. E. and Abot, J. L. Optical methods for analysis of deformation and failure of composite sandwich beams. Proceedings of SEM Conference on Experimental and Applied Mechanics, Society of Experimental Mechanics, Charlotte, NC (2003).

120. Yasmin, A., Luo, J. J., Abot, J. L. and Daniel, I. M. Mechanical behavior of epoxy-based nanoclay composites at room and elevated temperatures. Proceedings of 18th American Society for Composites Conference, Gainesville, FL (2003).

121. Abot, J. L. and Daniel, I. M. Composite sandwich beams under low velocity impact. Proceedings of 14th International Conference on Composite Materials, San Diego, CA (2003).

122. Yasmin, A., Abot, J. L. and Daniel, I. M. Characterization of structure and mechanical behavior of clay/epoxy nanocomposites. Proceedings of 14th International Conference on Composite Materials, San Diego, CA (2003).

123. Gdoutos, E. E. and Abot, J. L. Indentation behavior of cellular foams. 5th International Symposium on Advanced Composites - Advanced Composites in Technology, Corfu, Greece (2003).

124. Abot, J. L. and Daniel, I. M. Failure modes in glass/vinylester-balsa wood sandwich beams. Proceedings of 6th International Conference on Sandwich Structures, Ft. Lauderdale, FL (2003).

125. Abot, J. L., Yasmin, A. and Daniel, I. M. Mechanical and thermoviscoelastic behavior of clay/epoxy nanocomposites. Materials Research Society Symp. Proc. 740: 167-172, Boston, MA (2003).

126. Yasmin, A., Abot, J. L., and Daniel, I. M. Processing of nanoclay/epoxy composites with a three-roll mill. Materials Research. Society Symp. Proc. 740: 75-80, Boston, MA (2003).

127. Abot, J. L., Daniel, I. M. and Gdoutos, E. E. Failure mechanisms of composite sandwich beams under impact loading. Proceedings of 14th European Conference on Fracture I: 13-19, Cracow, Poland (2002).

128. Abot, J. L. and Daniel, I. M. Measurement of through-the-thickness mechanical properties of woven fabric composites. Proceedings of 17th American Society for Composites Conference, West Lafayette, IN (2002).

129. Gdoutos, E. E. and Abot, J. L. Indentation of a PVC cellular foam. Proceedings of 14th U.S. National Congress of Theoretical and Applied Mechanics, Blacksburg, VA (2002).

130. Abot, J. L., Yasmin, A. and Daniel, I. M. Impact behavior of sandwich beams with various composite facesheets and balsa wood core. Proceedings of International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Applied Mechanics Division 247, 55-69, New York, NY (2001).

131. Daniel, I. M., Gdoutos, E. E., Abot, J. L. and Wang, K. -A. Core failure modes in composite sandwich beams. Proceedings of International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Applied Mechanics Division 249: 293-303, New York, NY (2001).

132. Daniel, I. M., Gdoutos, E. E., Abot, J. L. and Wang, K. -A. Effect of loading conditions on deformation and failure of composite sandwich structures. Proceedings of International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Applied Mechanics Division 248: 1-17, New York, NY (2001).

133. Abot, J. L., Daniel, I. M. and Gdoutos, E. E. Failure mechanisms of composite sandwich beams under low velocity impact. Proceedings of 10th International Congress of Fracture, Honolulu, HI (2001).

134. Abot, J. L. and Daniel, I. M. Failure modes of composite sandwich beams under low-velocity impact. Proceedings of 16th American Society for Composites Conference, Blacksburg, VA (2001).

135. Abot, J. L. and Daniel, I. M. Composite sandwich beams under low-velocity impact. Collection of Technical Papers – AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 1: 67-77, Seattle, WA (2001).

136. Gdoutos, E. E., Daniel, I. M., Wang, K. -A. and Abot, J. L. Nonlinear behavior of composite sandwich beams in three-point bending. Proceedings of IX International Congress on Experimental Mechanics, Society of Experimental Mechanics, 155-158, Orlando, FL (2001).    

137. Daniel, I. M., Gdoutos, E. E., Wang, K. -A. and Abot, J. L. Failure modes of composite sandwich beams. Proceedings of XX International Congress of Theoretical and Applied Mechanics, Chicago, IL (2000).   

138. Daniel, I. M., Abot, J. L. and Wang, K. -A. Fabrication, testing and analysis of composite sandwich beams. Proceedings of 12th International Conference of Composite Materials, Paris, France (1999).

139. Daniel, I. M. and Abot, J. L. Fabrication, testing and analysis of composite sandwich structures. Proceedings of International Mechanical Engineering Congress and Exposition, American Society of Mechanical Engineers, Materials Division 84: 283, Anaheim, CA (1998).

140. Ricaldoni, J. and Abot, J. L. Theoretical-experimental study of the state of stress in a rectangular frame joint. Proceedings of XXVI Southamerican Congress of Structural Engineering, Montevideo, Uruguay (1993).